CBT Nuggets Exam-Pack 98-366 Microsoft Networking MTA
- Category: CBT
- Created on 19 April 2011
- Last Updated on 04 February 2013
- Written by Administrator
- Hits: 1601
If you're new to IT and networking, this is the place to start. Microsoft's 70-366 certification tells employers that you know how to set up and administer basic networks and have a good foundational knowledge for higher level network administration.
This series shows you how to create good network design, and explains how wireless networking and network equipment (particularly layer 2 and 3 switches and routers) work.
What You'll Learn
Video 1: Series Intro|02:47
Video 2: Network Infrastructure Concepts Part 1|55:01
Understand the concepts of Internet, intranet, and extranet , security zones
Video 3: Network Infrastructure Concepts Part 2|20:25
Understand the concepts of firewalls. CheckPoint Firewall. VPN, SSTP, PPTP, L2TP, IKEv2, DMZ, demilitarized zone, perimeter network
Video 4: Local Area Networks|42:22
Understand local area networks (LANs). perimeter networks; addressing; reserved address ranges for local use (including local loopback ip), VLANs; wired LAN and wireless LAN, peer-to-peer network, client-server network, switch, hub, repeater, router, gigabit ethernet, 10Gbe, ten gigabit ethernet. Examples of devices.
Video 5: Wide Area Networks|29:38
Understand wide area networks (WANs): leased lines, dial-up, ISDN, VPN, T1, T3, E1, E3, DSL, Cable, , etc. and their characteristics (speed, availability). Map T1 a LAN or WAN, modem, ISDN, integrated services data network, BRI, basic rate interface, PRI, primary rate interface, OC-1, OC-3, OC-12, OC-48, OC-192, digital subscriber line, cable modem, asynchronous transfer mode, ATM, VDSL, ADSL
Video 6: Wireless Networking|40:45
Understand wireless networking. Types of wireless networking standards and their characteristics (802.11A,B,G,N including different Ghz ranges), types of network security (WPA/WEP/802.1X etc.), point-to-point (P2P) wireless, wireless bridging, WPA2, wi-fi protected access, wired equivalency protocol, SSID, security set identifier, MAC address, administrator password, SMAC, wepcrack
Video 7: Topology and Access Methods|31:24
Understand network topologies and access methods. bus, token ring, ring, mesh, partial mesh, star, hub and spoke, ethernet, ethernet frames, CAT5, CAT5e, CAT6, CAT7, category cable, twisted pair cable, media access method
Video 8: OSI and TCP Models|42:18
Understand the OSI model. OSI model; TCP model; examples of devices, protocols, applications and which OSI/TCP layer they belong to; TCP and UDP; well-known ports for most used purposes (not necessarily Internet); packets and frames, Department of Defense Model (DOD model), FTP, HTTP, HTTPS, TLS, SSL, SNMP, IMAP4, POP3, NetBIOS, DNS, physical, datalink, network, transport, session, presentation, application
Video 9: Switches|43:13
Understand switches. transmission speed; number and type of ports; number of uplinks; speed of uplinks; managed or unmanaged switches; VLAN capabilities; Layer 2 and Layer 3 switches,, security options; hardware redundancy; support; backplane speed; switching types, mac table; understanding capabilities of hubs vs. switches, sub-vlan, console port, store-and-forward switches, crossover cable, cut-through (real-time) mode, FragmentFree (Modified Cut-Through), secure MAC address, dynamic mac, static mac, sticky mac, vlan opping, trunk connections, switchport mode access, private vlan, dhcp snooping, rogue dhcp, spanning tree attack, CDP, physical security, SSH
Video 10: Routers|47:00
Understand switches. transmission speed; number and type of ports; number of uplinks; speed of uplinks; managed or unmanaged switches; VLAN capabilities; Layer 2 and Layer 3 switches,, security options; hardware redundancy; support; backplane speed; switching types, mac table; Understand routers. transmission speed considerations, directly connected routes, static routing, dynamic routing (routing protocols), default routes; routing table and how it selects best route(s); routing table memory, NAT, software routing in Windows Server, RIP, routing internet protocol, open shortest path first, OSPF, IGRP, EIGRP, link state protocols, distance-vector protocol, the ROUTE command understanding capabilities of hubs vs. switches, sub-vlan, console port, store-and-forward switches, crossover cable, cut-through (real-time) mode, FragmentFree (Modified Cut-Through), secure MAC address, dynamic mac, static mac, sticky mac, vlan opping, trunk connections, switchport mode access, private vlan, dhcp snooping, rogue dhcp, spanning tree attack, CDP, physical security, SSH
Video 11: Media|21:58
Understand media types. cable types and their characteristics, including media segment length and speed; fibre optic; twisted pair shielded or nonshielded; catxx cabling, wireless; ; susceptibility to external interference (machinery, power cables, etc); susceptibility to electricity (lightning), susceptibility to interception, plenum-rated, STP, UTP, LC, Lucent connector, ST, straight tip connector, SC, square connector, BNC, british naval connector
Video 12: IPv4|47:56
Understand IPv4, subnetting, converting decimal and binary numbers, subnet mask, gateway, packets, reserved address ranges for local use, (including local loopback IP). custom subnetting, ANDing process.
Video 13: IPv6|37:47
Understand IPv6. Subnetting; IPconfig; why use IPv6; addressing; ipv4toipv6 tunneling protocols to ensure backwards compatibility; dual ip stack; subnetmask; gateway; ports; packets; reserved address ranges for local use (including local loopback ip) 4to6, 6to4, teredo, ISATAP, intra-site automatic tunneling protocol.
Video 14: Name Resolution Part 1|21:18
Understand names resolution. DNS, WINS, steps in the name resolution process, netbios names, hosts file, lmhosts file, broadcasts
Video 15: Name Resolution Part 2|42:31
Understand names resolution. DNS, WINS, steps in the name resolution process, netbios names, broadcasts, global names zone, GNZ, installing and configuring WINS, installing and configuring DNS
Video 16: Network Services|49:14
Understand networking services. DHCP, command line TCP/IP tools, Understand TCP/IP. ping; tracert; pathping; Telnet; IPconfig; netstat, net use
Video 17: Remote Access|29:51
Understand Networking Services. virtual private networks, VPN, layer two tunneling protocol, L2TP, point-to-point tunneling protocol, PPTP, Internet Key Exchange v2, IKEv2, Direct Access, secure socket tunneling protocol, SSTP, routing and remote access server, RRAS, Remote access dial-in user service, RADIUS
|CBT Nuggets Exam-Pack 98-366 Microsoft Networking MTA|
CBT Nuggets Exam-Pack 98-366 Microsoft Networking MTA
Please register or login to download files from this category.
|Homepage 2011-04-19 429.91 MB 6|